nd yag q switch laser machine

Short Description:

Send email to us

Product Detail

contact

Product Tags

Working principle

According to the principle of selective photopyrolysis, when shorted the action time of

the laser, the laser energy diffuses less to the surrounding tissue. If the energy is limited to

the target that needs treatment, the surrounding normal tissue can be protected, so the

selectivity of treatment become stronger.The picosecond laser pulse width is only 1% of the

traditional Q-switched laser. Under this ultra-short pulse width, the light energy is too late to

be converted into heat energy, and there is almost no photothermal effect.When the laser

energy is absorbed by the target, its volume will expand rapidly, and then be blasted and

torn into pieces. "The picosecond laser is more powerful and complete in crushing pigment

particles and less damaging the surrounding tissue." From the perspective of treatment, the

effective rate can reach more than 94% (Ota nevus almost 100%).

Application

Treatment advantage

(1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared with the traditional Q: switch laser, the pigment can be absorbed more easily and faster.

(2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful.

(3) There was no anesthesia and inflammation during the treatment.

(4) Fast： For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it.

(5) High performance: Using picosecond laser technology can completely remove tattoos and pigments.

(6) Try any skin type, no obvious pigmentation after treatment.

Laser type	Pico second ND: YAG Laser
Energy Level	Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm)
Pulse width	750ps
wavelength	1064nm,532nm,585nm(option),650nm(option)
Frequency	1-10hz
Spot size	2-10mm
Dimension	10750118CM
weight	115KG

Postoperative care

1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7--14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation.

2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking.

3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months.

4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best
5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time.