ICOOL-III Air Cooler machine

Short Description:

Product Detail

contact

Product Tags

Working Therapy

The 1500W high-power compressor provided by Danfoss ensures that the system can work continuously for a long time.The high-speed fan makes the air emit a strong cooling effect,and the fan automatically adjusts with the temperature setting.Self-defrosting is the best performance ofrefrigeration performance. The self-draining system ensures safe and clean use. The support rod device of the blowing pipe makes the operation more comfortable.

Unlike other cooling methods, such as contact cooling, cryogen spray or ice packs, the ICOOL-3 can cool the epidermis before, during and after the laser energy has been applied, without interfering with the laser beam.

Laser source: Stormfiber-II air cooling system
Controlling screen:	2.4 inch multi color screen
Cooling power:	1500W
Temperature range:	-4℃~-30℃(adjustable)
Refrigerants:	R404A
Fan speed:	1~8 level (adjustable)
Treatment Pipe:	2.5m
Pipe weight:	200g
Outlet adaptor size:	Φ6mm Φ10mm 10mm*1.5mm
LCD Screen:	2.4 Inch
Storage platform size:	45028020mm
Machine size:	610380750mm 50KG
Package size:	820-500-930mm 74KG
Power source:	AC/100-240 V, 50-60 Hz，10A
Safety Class:	EN60601-1,TypeB MDD/MPG,Class I

Advantage:

①HIGHLY Compressor Imported from Japan and DUPONT environmentally friendly refrigerant R134a;

②Ultra- low temperature refrigeration -35 degrees

③Appli cable to foreign machines ( same s i ze as ZIMMER and foton);；

④2.5mm length and 200g weight of the air pipe are more flex ible;

⑤5.1L large capacity bellows , sus tainable ultra- low temperature treatment;

⑥Dedi cated bracket for easy operation with orientation;

⑦2.4- inch true color touch s creen, vi sual human-machine interface;

⑧700L/min super s trong wind speed, 8 gear s adjus table, suitable for various treatment s ;

⑨The whole machine i s equipped with s ilencer to reduce treatment noi se and make treatment more comfortable;

⑩Super s trong platform, placed with a variety of ins trument s for use.

Adapters for Diode laser and IPL

After inserted the connector assembly,The I-Cool could works with 808nm diode laser hair removal machine, co2 fractional laser machine, SHR machine, IPL machine and Nd yag laser machine...Suitable for all machines if patients feel pain and needs cooling procedure.

Treatment

1. Before treatment, air cooler can be used to blow the treatment area for 2 minutes to cool the treatment area

2. For treatment with photoelectric equipment, the air outlet should be a imed at the light emitting part

3. If there is no matching handle with the photoelectric device, when per forming facial treatment, the air outlet needs to be inclined along the direction of the patient's forehead to chin for treatment, so that the patient more comfortable.

Precautions of using

(1) The temperature setting can be adjusted 8 minutes after starting;

(2) The interface only displays the set temperature, not the actual temperature;

(3) The wind speed can be adjusted automatically according to the temperature setting, the lower the temperature, the higher the wind speed;

(4) Observe the water level before using the machine. If thewater tank is full, drain it in time;

(5) The instrument cannot be transported upside down, and it must be left for two hours before it can be used.

Details

CE Certificate

Exhibition

We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: